When we choose a diamond ring, we not only need to consider the quality of the diamond, but also the workmanship of the diamond ring. The price of a diamond ring is not only influenced by the quality of the diamond and the material of the ring holder, but also by the workmanship of the diamond ring. How to evaluate the workmanship of diamond rings?
1. How to evaluate the workmanship of diamond rings? Check if the diamond is firmly embedded. To prevent the diamond from falling off, it is not only necessary to safely grasp the diamond, but also to ensure that there are no gaps in the contact between the diamond and the metal below the pavilion.
2. Does the shape of the diamond ring meet the designer's requirements. If the designer's diamond ring requires a symmetrical shape, its pattern and shape must not deviate from the center, or be symmetrical on both sides, or on all four sides, and there must be no unevenness or inconsistency in size on both sides of the symmetry.
3. Whether the metal surface appears to have cracks and whether the inner surface is smooth. Improper casting, welding, and inferior alloys can leave these marks. A finely crafted diamond ring will not leave a rough surface or have uneven edges.
4. There are welding seams or marks on the diamond ring. A high-quality diamond ring with fine processing, smooth and even surface, delicate quality, no cutting marks or burrs; The pattern combination of the ring is harmonious, delicate and clear, and the pattern is smooth. Uniform in a circle, moderately wide and narrow. If it is a gold-plated or gold-plated ring, its surface should be bright and uniform, with consistent color, and there should be no pores, black spots, or dull luster at the corners and concave convex junctions; The welding points should be smooth and free from solder joints.
5. Diamond ring face and ring foot, check if the weight of both is appropriate. How to distinguish the quality of diamond ring craftsmanship? Generally, a well crafted diamond ring has a slightly heavier surface than the ring foot, but if the workmanship is not very good. When it is too heavy, the diamond ring will fall towards the belly of the finger. The method of inspection is to first wear the ring on the little finger, keep it loose, gently shake it, and ensure that the ring surface does not turn towards the lower end of the flat finger.